![]() Make sure that your cameras each have different IP addresses from the computer. In this example, they are chosen to be the same as the dynamic IP address for convenience. We know that the first two numbers must be. Now, you must choose an IP address for the camera. Unlike a dynamic IP address, this will not change each time the camera is powered up. This will let you set a static IP address. Here, you can select a "use the following IP address". In FLIR IP Config, you can simply click the gear icon to change the camera's IP settings. Now you can change your camera's IP address. ![]() This is the actual identifier for the computer. Any numbers after that are not important. The subnet mask tells us which numbers are important in the subnet. In most applications with the cameras, a gateway will not be used and can be set to an arbitrary value. Let's look at the IP address for one ethernet connection. In this image, you can see multiple IP addresses for the host computer.Īs you can see in the example above, your computer has a separate IP address for each wifi and ethernet connection. You can run the command ipconfig from the Windows command prompt which will show you your computer's IP address (see below). Let's assume that you are connecting a camera to your Windows PC. Physically connecting two devices over ethernet connects them but their IP Address must place them in the same subnet in order for them to talk. In order for devices to talk to each other, they must be within the same subnet.
0 Comments
Leave a Reply. |